ListarIC - Contribuciones a congresos científicos por tema "Antenas"
Mostrando ítems 1-16 de 16
-
Análisis Preliminar del Strip-slot Complementario en Tecnología Stripline
(2017-09-20)A stripline-fed slot antenna configuration is proposed using planar technology. Its main advantages are the broad impedance bandwidth available and the radiation in only one half-space, which are obtained with the use of ... -
Application of Huygens’ Metasurfaces to the Arbitrary Design of a Leaky-Wave Antenna
(2017-09-13)Leaky-wave antennas are guiding structures that leak power along their length. Their radiation is mainly characterized by the propagation constant (leakage factor and phase constant) of the traveling wave. In this ... -
Arrays planares basados en el elemento strip-slot complementario
(2013-09-13)Recently, the authors introduced a novel planar radiating element that exploits the characteristics of the slotline microstrip coupling to obtain a microstrip-fed slot with broadband matching. This paper reviews the main ... -
Barrido del haz en antena de onda de fuga basada en metasuperficie mediante cristales líquidos
(Iñigo Cuiñas Gómez, 2021-09-23)In this communication, the reconfigurability mechanisms for beam steering at a fixed frequency in a leakywave antenna based on Huygens metasurfaces are reviewed. A preliminary design for a forward-to-backward scanning ... -
Building Arrays with the Unidirectional-Radiating Complementary Strip-Slot
(Iñigo Cuíñas Gómez, 2021-09)An upgraded version of the complementary stripslot radiating element is reviewed. The original radiating element consists in a microstrip-fed slot in transmission configuration. In the proposed modification, the slot is ... -
Circuito equivalente analítico basado en vectores y valores propios para superficies periódicas con ranuras estrechas.
(2023)In this work, the values of the parameters of the eigenstate lattice network are obtained by using only analytical means. The procedure is applied to a simple structure, consisting of a bi-periodic surface made of a slotted ... -
Design Aspects of a Broadband Beam-Reconfigurable Leaky-Wave Antenna
(IEEE Antennas and Propagation Society, 2016)Design aspects of a novel beam-reconfigurable pla-nar series-fed array are addressed to achieve beam steering with frequency tunability over a relatively broad bandwidth. The design is possible thanks to the use of the ... -
Dual Beam Sinusoidally Modulated Reactance Surface Antenna
(2020-09)In this work, a planar dual beam Sinusoidally Modulated Reactance Surface (SMRS) antenna is presented. Our method is based on the implementation of a surface impedance modulated by the superposition of two sinusoidal ... -
Elemento radiante de banda ancha en microstrip cerrada para arrays alimentados en serie
(2018-09-07)A previous radiating element in transmission configuration proposed by the authors is alternatively implemented using enclosed microstrip configuration. The new implementation overcomes fabrication issues and improves its ... -
Miniaturized Top-Metalized 3D-printed Rectangular Dielectric Resonator Antenna.
(2024)This paper introduces a novel top-metalized Dielectric Resonator Antenna (DRA). The inclusion of top metallization induces a modification in the boundary conditions, resulting in a frequency reduction in the fundamental ... -
Non-homogeneous Fabry-Pérot Antenna Design at Ku-band
(2021-09-21)A novel technique to design Fabry-Pérot antennas with non-homogeneous PRS is described. It takes advantage of a transmission line circuit model to efficiently obtain all necessary unit cell designs that satisfy the cavity ... -
Non-homogeneous Fabry-Pérot antenna design process to improve aperture efficiency
(2022-03-27)A novel technique to design Fabry-Pérot antennas with non-homogeneous partially reflective surfaces (PRSs) is described. It uses a transmission line circuit model to efficiently obtain all necessary unit cell designs that ... -
Novel Implementation for a Cavity-Backed Slot Fed in Transmission Configuration
(2018-04-23)A novel radiating element proposed previously by the authors is alternatively implemented using enclosed microstrip configuration. The radiating element shows broad impedance bandwidth and unidirectional radiation pattern. ... -
Physical Implementation of Leaky-Wave Antenna with Engineered Aperture Distribution Based on Bianisotropic Huygens Metasurfaces
(2023)A methodology based on omega-type bianisotropic Huygens’ metasurfaces is presented to control the aperture field distribution of leaky-wave antennas. The studied structure is a parallel-plate waveguide with the top plate ... -
Ranura de Banda Ancha en Doble T Sobre Cavidad para Arrays Alimentados en Serie
(2019-09-16)A previous radiating element for series-fed arrays proposed by the authors and based on a Cavity-Backed Slot (CBS) is modified to improve its bandwidth. In order to do that, the slot is modified to reduce its resonance ... -
Recent progress in subwavelength grating metamaterial engineered silicon photonic devices.
(2023)In this talk we present our recent advances in SWG metamaterial engineering. We will show a 1D-optical phased array composed of 112 evanescent-coupled surface emitting antennas with a length of 1.5 mm and fed by a compact ...